Deck Wash Directions
STEP 1: Pour: Pour water and contents into a pail. Stir and let product activate for 10 minutes. At contents to a pump sprayer and apply.
STEP 2: APPLY: Horizontal Surfaces: Apply Deck Wash solution with sprayer, brush, or mop, working on small areas, (20-30 sq. ft.) at a time.
STEP 3: BRUSH: Horizontal Surfaces: Let solution stand approximately 15-20 minutes, keeping area wet with additional Deck Wash solution. Thoroughly scrub with a stiff, short bristle broom or brush. Vertical Surfaces: Let solution stand approximately 15-20 minutes, keeping surfaces wet with additional solution. Thoroughly scrub with a stiff, short bristle broom or brush working from bottom to top.
STEP 4: RINSE: Rinse thoroughly with water from hose or pressure washer using lowest pressure that cleans without damaging the wood. Repeat steps 2-4 on next small area. Rinse cleaned area of vertical surfaces to avoid streaking as work progresses. Allow wood surfaces to thoroughly dry before applying finishes. Coverage: One gallon of Deck Wash cleans and restores 100-200 square ft. depending on wood porosity and applicator used.
STEP 5: BRIGHTEN: *Optional* After cleaning the entire project, brighten wood by using a deck brightener. If this Step is used, any wood brightener will work. Make sure all cleaner and brightener is completely removed before application of One TIME.
Reviews
There are no reviews yet.